"Just wanted to express my words of gratitude for your fantastic products and your ever helpful staff!

"My first experience with your products was for a little Mercedes project, I bought a used, very rare urethane kit from a sport Euro model, that was never available as an option for my year.  It was obviously weathered, scratched, even some through-holes on the side skirts...

"Using your products, such as Bumper Glaze, Spot putty filler and Flex Primer Surfacer, this one of a kind body kit was given a new birth!  Bumper glaze is amazingly easy to work with, goes on smooth, and sanding it down (wet or dry) is a pleasure.  Spot putty goes a very long way filling those little imperfections and pinholes.  Flex Primer adheres very well, builds up well and easy to feather to perfection!

"Thanks to you, the car is transformed from this:

"Into this:

"Time for a new project, just acquired rare S-line used front bumper for my Audi A4, it too has seen better days.  Your staff and your product to the rescue again!  I know it will look better than new!

"Thank you very much for all your help!"

Regards,
Dmitry Repnikov

"You can see how well the plastic welder worked on the major breaks in the 1972 Trans Am valance I just repaired. Thanks to you, I saved about $2,000 since that's about what one of the irreplaceable polyethylene valances go for if you can ever find one.

The process and the tool was amazingly easy and I just saved an irreplaceable part for about $90 in material and 3 hours of work. Here's the crack.	Applying the welding rod and melting the stainless steel mesh in to the backside of the repair
The front side after valance was flipped over and the procedure was repeated	The hard part was the broken face bar
After aluminum taping you can how hard it was to get in behind to affect the repair	After the repair
And here's the final product.

"I'm glad I found you guys, this is an amazing contraption and it helped me save an irreplaceable piece of my car.

Steve
New Jersey

"I make more money on cladding than with leather. I sprayed three new Chevy Avalanches that had been on the lot for over 500 days. The cladding was already tiger striped. After I painted them, two of them sold right away. After that, the dealer was so ecstatic, I've been going twice a week. Your product is fantastic.

Brad Pegg
Seat Savers
Woodstock, KS

"We've had so many problems in the past with Toyota bumpers peeling. We've done more than 400 bumpers since we started using Bumper & Cladding Coat and haven't had any peelers come back. It's been amazing. I'm very happy with it! It's made our lives a lot easier!

Billy Bryson
Classic Toyota Collision Repair
Round Rock, TX

"Kudos to you guys! I have a mobile touch-up business. I have blown away a lot of dealers with this paint. It's opened up a brand new market for me. It's awesome. I used to walk away from this kind of business.

"I'm usually skeptical about these claims, and I wouldn't have believed it if I hadn't seen it at the show."

Bruce Zahnd
Body Shop Alternative
Simpsonville, NC

"The Bumper & Cladding Coat quart toner package paid for itself the very first time I used it. This stuff is a real breakthrough."

David Obine
Bumper Express
San Diego, CA

"I've been doing mobile resorations for over a decade... interior and exterior. I've been doing textured bumpers with (brand S) for years, but now that I've tried Bumper and Cladding Coat, I'm throwing all that stuff in the garbage. Bumper and Cladding Coat has awesome color matches, hides great, and sticks like glue. I've already made a bunch of money with it! "

Dave Henry
Custom Restorations
Camanche, IA

"I've been using it for two years now. It's a real time saver and I've never had a comeback. "

Harold
Harold's Auto Center
East Aurora, NY

Tim Beck
Beck's Body and Paint
Anchorage, AK

Harold
Harold's Auto Center
East Aurora, NY

"We love it! There is nothing else like Black Cat. We will not use anything else. Ever! We are not about to change. It's great!

John and Trish
Routt Repairables
Bellefontaine, OH

"Works great, sands great... it even dries good. Black Cat is an excellent product with no problems at all.

Phyllis Warren
Recycled Bumpers
Augusta, GA

The Black Cat is great! We are very pleased with it. We are going to start ordering it in 50 gallon drums. The only problem we have is that we can't keep our guns full enough of it.

Gil Gray
Bumper Network
Birmingham, AL

With the addition of the 3020 Black Cat Waterborne Primer, we have increased our business by unbelievable proportions. This catalyzed primer has raised our customer satasfaction to a whole new level. The 3020 Black Cat Primer has been truly fantastic for our company and our customers.

Randy Norman
Ace Industries
Mentone, IN

"This stuff works great on just about everything. I did a tab on a Dakota grill, and except for the color, it looked absolutely factory. I also fixed a motorcycle fairing for this guy and he just couldn't believe how good it looked. I've repaired everything from composite headlight tabs to plumbing in an RV."

Ertie Veal
Redeemed Bumpers
Lookout Mountain, GA

"I just wanted you guys to know that we appreciate the new products you guys are putting so much work into. We just did some repairs with the PlastiFix kit, and they worked beautifully. This stuff is the best thing since the Uni-Weld rod!"

Shawn Dixson
Cape Fear Community College

"I just wanted to thank you for your recomendation for plastifix. I requested some ideas for grill restoration back in november and you said plastifix was probably my best bet. I couldn't be any happier with the results!! That product could not have been any quicker or easier to use. While my grill may not be "concourse" quality, it sure looks perfect to me. Thanks again and I'll be sure to tell everyone I can about what a great product you have."

Mark Thomas
'68 Charger

"I had a center console of my plane that was broken. A new center console was going to cost $1,500! I used the PlastiFix kit with the molding bar to re-create a broken-out area. It looked brand new when I was done. PlastiFix saved me $1,500!"

Mark Neal
Airplane

"I would like to tell you how pleased I am with the results using the plastic repair kit you you sold me. After all kinds of repairs, I can tell you it has paid it has paid for itself many times over. I saved hundreds fixing the plastics on a Cessna 210 Centurion. And it was easy! Along with a Dremel tool to remove the excess and do some shaping I had all that expensive plastic fixed in a couple evenings. Some plastic paint primer and enamel to cover the old age fade and I have a new 1977 interior. Showed my plane mechanics at the airport. They want one.  Tonight I fixed a lever on a $1,200.00 Coin Counter someone had tossed out. I need one so I called to get the part. Found out it was to old to get parts so I fixed it with the kit."

David D'Hondt
Fort Myers, FL

"Ok, I was skeptical, I figured I had just wasted $30.  I had some ABS interior plastic on a GM truck where a clip attaches to the plastic.  While applying the Plastifix, I was not sure the repair would hold.  The previous owner had used epoxy and something with a gummy consistency - and it didn't hold.  The Plastifix (mixed rather than dropped w/needle) cured solid, considerably more so than the original part.

Wow.  ($30 well spent.) "

Barry Soben

"It's amazing how many times we repair bumpers that the body shops have tried to repair using two-part adhesives. We repair them with the FiberFlex and it holds every time. You can twist it, pull it...it's awesome!"

Brian Stoops
The Touch Up Company
Springfield, MO

"I've been using it on everything. I don't even need to use the reinforcing mesh. I haven't had a comeback yet."

Darrell
Bumper Doctor
Mesa, AZ

"The strength is great. We can replace tabs and we don't have to worry about our customers pulling them off. Easy to use and very strong."

Bob Foote
Faith Bumper Service
Santa Clara, CA

"I love it! It just bonds real well. It's easy to use and that helps when you have inexperienced people."

Frank
Electro Bumper Plating
Kansas City, MO

"Works great on the harder plastics like Saturn and 626's. Best rod you guys came out with in years."

Brian
Best Bumper Supply
Dallas, TX

"Works well on things where nothing else will work, like tabs and flanges that have to be flexible."

William Robbins
Robbins Bumper Service
Mobile, AL

"I just purchased the welder lite kit and it is awesome. I followed your instructions off of the web site and used a little common sense and it works perfect. I searched the entire dallas area for a kit and no one has anything close to what you provide in your kit. You all get two thumbs up for producing a quality kit. Thanks.

Brian Blankman
bblankman@deloitte.com

"This is the best waterborne. People are always coming in here trying to get me to use their waterborne primer. Nothing compares to yours. I love it!

Rod Stromburg
Perfecting Plastics
Jordan, MN

"I've only had this welder for two months and I've already made over $1,200 with it!."

Ted Arentz
Classic Touch Autos
Joshua, TX

"I had to teach the auto body course even though I don't have any experience. We got one of your welders and my first job was to weld the fender on one of the kids' RM250. I'd never plastic-welded before and I didn't expect it to be so easy. It worked really well...it just amazed everybody! The repair has stood up well to the abuse it takes. Now all the kids are bringing their plastic stuff in here for repair!"

John Karavage
Birks County Technical School
Eastern, PA

"This welder is just soooo easy to use, it made the job fun! I wish I'd bought one of these things years ago. It works like it's supposed to."

Bryan Ramsey
The Restoration Shop
Falmouth, VA

"This thing is very profitable and easy to use. It has bailed me out of tight spots many times when there was unseen damage that I did not quote."

Mark Abrahamson
Highway 18 Collision
Brainerd, MN

"First job I did, paid for the whole kit. The information you supply makes bumper repairs simple. I am mobile and I can beat the body shop prices by at least 60% with the Plastic welder. My repairs on tabs and holes are stronger than the rest of the bumper. What a money maker!!!! Thanks"

Joe Cashion
Victorville, CA

"The plastic welder is the best tool I've used in my 20 years of experience in the body shop."

Steven Yuen
Central Motors
Dumas, TX

"I just bought the plastic welder. It paid for itself on the first job"

Ron Larmon
Elite Restoration
Dalton, GA

"That welder paid for itself the second time I used it."

Alec Dwelis
Smart Alec
Circle Pines, MN

"It's amazing how many times we repair bumpers that the body shops have tried to repair using two part adhesives. We repair them with the FiberFlex and it holds every time. You can twist it, pull it ... awesome!"

Brian Stoops
Touch Up Tool Company
Springfield, MO

"My guys love it! They start screaming if we get low! It sands better than 3M or SEM and feathers out great. It doesn't dye back or leave a ring."

Randy Robinson
Robinson's Chrome
Hughson, CA

"That stuff is awesome. It's great on the bumpers when you have a little chip or something. You don't have to mix up a bunch of stuff for such a small chip. You just put a little bit of that spot putty in there and in about 10 minutes, you're sanding.

Randy Burmeister
Colors Unlimited
Springfiled, MO

"I just wanted to write to tell you that your InstaWeld kit save me $600 in a new fairing for my beautiful Yamaha YZF750 sportbike. One of the alignment and attachment tabs through which a screw passes to connect two pieces of the fairing had not just cracked, but broken into six or seven pieces. Two-part epoxy couldn't hold it. But, in half an hour with the InstaWeld kit, I had put pieces back together, filled in the cracks, and sanded it down so that the metal screw receptacle fit right on. I put the fairing back on the bike with no trouble. A new fairing piece would have cost me $600. This product is amazing."

Ari Gabinet

"I damaged an ATV fender and went searching for repair info. I found your site. It's the most informative site I've ever surfed. My order was sent on-line. I'm now smarter on this subject than I ever imagined. Many, many thanks. Very well done!"

Andy Z.

"I manufacture Extractor Rescue sleds and riverboards. I use the ATV Fender Welder occasionally to make hull repairs. I recommend my customers to your website as a source for repair welders and filler rod. I just recommended the welder to Dafo, my distributor in Sweden. You may be hearing from them. You may use my product name and add it to your website on the Kayak Welder page if you want. "

Dan Elias - Owner
Extractor
1776 Courntry Lane
Escondido, CA 92025
760-809-0355
www.extractorsled.com

"I cannot say enought great things about the ATV repair kit. If you are looking for a do it yourself kit, that is "easy" and I will attest it is Durable. then this is the kit for you.  Why spend hundreds of dollars on new plastics when you can fix them yourself. I will tell all of my friends who ride a motorcycle or ATV this is a must have. Great Product!

Thank you.

Glenn D. Jackson
Austin, TX

"I purchased your ATV PRO WELDER 1. Tried it on my son's busted fender today . I found the unit very easy to master and it did a wonderful job. After the weld job was done, I sanded the area and almost made the 10" crack invisible. Amazing. Great product! Now my buddy has his busted fender in my garage.  Thanks"

David Foster

Hey guys,

Just wanted to say thanks!  I ordered the KC Welder kit and had my Coleman canoe fixed in just 1/2 hour!  I thought about doing this myself and tried a torch with bad results.  I ordered the KC welder and that did the trick!

Thanks again for your help!

Eric McIntyre
Pepperell, MA

"In all my 15 years in the body repair trade, I've never had a problem with a bumper coming back with the paint peeling when I use the Plastic Magic. It simply does not peel! I spray it on the primer too to help basecoat adhesion. DuPont wanted me to use their system. I tried their product once, and that bumper came back peeling!"

Richard Jones
David Allan's Body Shop
Huntsville, AL

"As a Fleet Manager I'm always looking for new ideas to reduce cost and kep work in-house. Your web-site has given me the information I need to effectively begin plastic repair of various types. Outstanding!"

Stephen DeCarlo
via email

"Your web site is great. The information and services provided are outstanding. I especially like the downloads available in the Acrobat format. What a great way to have users of your products informed of technical and new product information. It appears to me that your company is setting a new standard."

Mike Maloney
Collision Repair Instructor
Elkhart Area Career Center

"We have spent hours on the internet trying to find useful inormation on plastic repair, identification, and technique. Your site is the best that we have found. It gives us useful information, and is easy to navigate. This has saved us a tremendous amount of time."

Richard & Kim Mays
via email

"Your web-site is very informative. It is the most informative site on the net when it comes to plastic repair. Keep up the good work"

John Lombardo
via email

"Great Web site. I really appreciate the detailed instructions you offer on the site."

Michael Champagne
Canada

I found your site while searching for information to help me repair some plastic fairings and other parts on an old Yamaha motor scooter. I want to tell you how much I appreciate the amount of helpful information your site provides. I've learned more about plastics and plastic repair than I thought would be possible. Please keep this invaluable resource on the air!

Jeffrey Street
via email