Specialty Fillers

Urethane Supply Company has everything needed to repair and refinish plastics. From plastic welders to instant glues to epoxy fillers to paints to primers, you name it. Some of our products that you may be familiar with are: Mini-Weld Airless Plastic Welder, Plastic Magic Adhesion Promoter, PlatiFix plastic repair kit (not to be confused with Plastex plastic repair kit), Bumper and Trim Black (not to be confused with Forever Black), Wax Blaster wax remover, Flex Filler (not to be confused with Duramix), Black Cat primer (not to be confused with Transtar Hydroflex), Insta-Weld adhesives (not to be confused with Crazy Glue or LocTite), Bumper and Cladding Coat, ATV Fender Welder, Kayak and Canoe Welder for Pelican canoes, FiberFlex welding rods, Uni-Weld welding rods, EZ Weld Hot Air Plastic Welder, Steinel hot air plastic welder. We also carry a complete line of plastic welding rods. For example, we manufacture ABS welding rods, Polypropylene welding rods, Polyethylene welding rods, TPO (TEO) plastic welding rods, Polyurethane welding rods. In addition to the products you need to repair plastic, we also have detailed instructions and tutorials with step-by-step instructions on how to repair plastic.

		New Products	Shopping Cart	Store Directory
1-800-633-3047		International Distributors	Contact Us	Testimonials	About Us

MENU

Catalog & Store

How-To...

Step-by-Step

Documents

Newsletters

ATV's & Motorcycles

Bumper Recyclers

Videos

Training

Bumper Repair Boot Camp

Everything Else

Private Label

Specialty fillers for those odd jobs

For odd jobs, all you need is the right products and step-by-step instructions

Putty Flex Bumper Glaze

Putty Flex Bumper Glaze
Part No. 1047
1 quart (946 ml)
$29.95

Our 1047 Putty Flex polyester glaze has the easy-sanding characteristics of the best finishing glazes on the market, but it’s much more flexible. Compared to our old Bumper Glaze product, the Putty Flex has a lower viscosity for excellent smoothness and flow. Cream hardner is included.

Flexible Spot Putty

Spot putty is always good to have around for minor pinholes and sand scratches and bumper recyclers just love "the pink stuff", and so will you.

"That stuff is awesome. It's great on the bumpers when you have a little chip or something. You don't have to mix up a bunch of stuff for such a small chip. You just put a little bit of that spot putty in there and in about 10 minutes, you're sanding."

Randy Burmeister
Colors Unlimited
Springfield, MO

Flexible Spot Putty
Part No. 1040-T
5 fl. oz. (150 ml) squeeze tube
$8.95

Padded Dash Filler

Fill in those cracks and gouges with this catalyzed flexible polyester filler. This is the same stuff used by mobile technicians to restore dashboards at used car lots.

Padded Dash Filler
Part No. 2050-9
8 fl. oz. can with cream hardener
$19.95

Filler Prep

Stop the featheredge from peeling up, once and for all

On many of the problem plastics, the featheredge starts rolling up when you try to sand it. When that happens, what do you do? You grind it all off and start over. This time, use Filler Prep first.

Filler Prep is a highly concentrated adhesion promoter which helps the filler get a good "bite" on the plastic and helps eliminate the peeling problems... and it is so easy to use. The lid has a brush that you use to apply Filler Prep to the area where you are going to apply filler. Don't put filler on until you put Filler Prep on first.