Adhesion Promoters

Urethane Supply Company has everything needed to repair and refinish plastics. From plastic welders to instant glues to epoxy fillers to paints to primers, you name it. Some of our products that you may be familiar with are: Mini-Weld Airless Plastic Welder, Plastic Magic Adhesion Promoter, PlatiFix plastic repair kit (not to be confused with Plastex plastic repair kit), Bumper and Trim Black (not to be confused with Forever Black), Wax Blaster wax remover, Flex Filler (not to be confused with Duramix), Black Cat primer (not to be confused with Transtar Hydroflex), Insta-Weld adhesives (not to be confused with Crazy Glue or LocTite), Bumper and Cladding Coat, ATV Fender Welder, Kayak and Canoe Welder for Pelican canoes, FiberFlex welding rods, Uni-Weld welding rods, EZ Weld Hot Air Plastic Welder, Steinel hot air plastic welder. We also carry a complete line of plastic welding rods. For example, we manufacture ABS welding rods, Polypropylene welding rods, Polyethylene welding rods, TPO (TEO) plastic welding rods, Polyurethane welding rods. In addition to the products you need to repair plastic, we also have detailed instructions and tutorials with step-by-step instructions on how to repair plastic.

		New Products	Shopping Cart	Store Directory
1-800-633-3047		International Distributors	Contact Us	Testimonials	About Us

MENU

Catalog & Store

How-To...

Step-by-Step

Documents

Newsletters

ATV's & Motorcycles

Bumper Recyclers

Videos

Training

Bumper Repair Boot Camp

Everything Else

Private Label

Adhesion promoters

Paint adhesion and filler adhesion are easy with the right products and, even better news...

You can do it too.

Why is it so hard to get adhesion on some plastics? I tried to get one of the guys in the lab to explain it to me and it was way over my head... But, the important thing to know is not "why" but "how". In other words, "How do I get paint and fillers to bond well to plastic?"

You need an adhesion promoter

How many times have you tried to sand down your filler, only to have the edge start peeling up on you? If you've only had it happen once, then you've had it happen too many times.

Here's the problem...

When you put fillers or paint on some of the "problem plastics" the filler wants to "bead up" like water on a freshly waxed car. The secret of adhesion promoter is the resin. It has one of the only resins that will actually stick to the "problem plastics"

Plastic Magic and Filler Prep both contain this special resin.

Filler Prep

Filler Prep is a highly-concentrated adhesion promoter with the extra gripping power needed to withstand the tearing forces of sandpaper.

Filler Prep
Part No. 1060FP
4 fl. oz. can with applicator
$7.95

Important Note:
This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.

Plastic Magic

Plastic Magic is for making paint stick to "problem plastics". It's not as concentrated as the Filler Prep. If you need to make your filler stick, use Filler Prep. If you need to make your paint stick, use Plastic Magic.

Plastic Magic (aerosol)
Part No. 1050-A
19 fl. oz. (562 ml) aerosol can
$15.95

Important Note:
This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.

Plastic Magic
Part No. 1050-4
quart (0.94 liter)
$21.95

Important Note:
This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.

Plastic Magic
Part No. 1050-1
gallon (3.78 liter)
$57.95

Important Note:
UPS charges a $20.00 HazMat fee to ship this item. This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.