Bumper Adhesion Primer

Urethane Supply Company has everything needed to repair and refinish plastics. From plastic welders to instant glues to epoxy fillers to paints to primers, you name it. Some of our products that you may be familiar with are: Mini-Weld Airless Plastic Welder, Plastic Magic Adhesion Promoter, PlatiFix plastic repair kit (not to be confused with Plastex plastic repair kit), Bumper and Trim Black (not to be confused with Forever Black), Wax Blaster wax remover, Flex Filler (not to be confused with Duramix), Black Cat primer (not to be confused with Transtar Hydroflex), Insta-Weld adhesives (not to be confused with Crazy Glue or LocTite), Bumper and Cladding Coat, ATV Fender Welder, Kayak and Canoe Welder for Pelican canoes, FiberFlex welding rods, Uni-Weld welding rods, EZ Weld Hot Air Plastic Welder, Steinel hot air plastic welder. We also carry a complete line of plastic welding rods. For example, we manufacture ABS welding rods, Polypropylene welding rods, Polyethylene welding rods, TPO (TEO) plastic welding rods, Polyurethane welding rods. In addition to the products you need to repair plastic, we also have detailed instructions and tutorials with step-by-step instructions on how to repair plastic.

		New Products	Shopping Cart	Store Directory
1-800-633-3047		International Distributors	Contact Us	Testimonials	About Us

MENU

Catalog & Store

How-To...

Step-by-Step

Documents

Newsletters

ATV's & Motorcycles

Bumper Recyclers

Videos

Training

Bumper Repair Boot Camp

Everything Else

Private Label

Bumper & Cladding Adhesion Primer

Compatible Substrates — Incompatible Paint Systems —
Bumper and Cladding Coat — Examples and Video

Urethane Supply Company's Bumper & Cladding Coat Adhesion Primer is an advanced solvent based coating system designed to help you automotive base-clear topcoat system stick to TPO plastic bumpers.

Bumper & Cladding Coat Adhesion Primer sticks to unsanded, unscuffed raw TPO plastic. Once the Adhesion Primer is dry, it can be topcoated without sanding or scuffing.

"I've been using it for two years now. It's a real time saver and I've never had a comeback. "

Harold
Harold's Auto Center
East Aurora, NY

Light Gray

Bumper and Cladding Adhesion Primer (Light Gray)
(aerosol)
Part No. 3601-A
11 fl. oz. (325 ml)

Important Note:
This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.

Bumper & Cladding Adhesion Primer (LIGHT Gray)
Part No. 3601-4
quart (946 ml)
$64.95

Important Note:
This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.

Bumper & Cladding Adhesion Primer (DARK gray)
Part No. 3602-4
quart (946 ml)
$64.95

Important Note:
This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.

Dark Gray

Bumper and Cladding Adhesion Primer (Dark Gray)
(aerosol)
Part No. 3602-A
11 fl. oz. (325 ml)

Important Note:
This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.

Bumper & Cladding Adhesion Primer (LIGHT gray)
Part No. 3601-1
gallon (3.8 liters)
$209.95

Important Note:
UPS charges a $20.00 HazMat fee to ship this item. This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.

Bumper & Cladding Adhesion Primer (DARK gray)
Part No. 3602-1
gallon (3.8 liters)
$209.95

Important Note:
UPS charges a $20.00 HazMat fee to ship this item.This product can be shipped only in the USA and it must go "Ground"... No air shipments of this product.

Easy-To-Follow Directions For Use...

Step 1 - Clean Plastic with 1000 Super Clean Plastic Cleaner. Spray on a heavy, wet coat, wait a few seconds, then wipe in one direction with a clean cloth.
Step 2 - Agitate B&C Coat Adhesion Primer and pour into paint gun. No reducer or activator required. Apply with 0.8-1.2mm basecoat gun for fine atomization. Apply one or two light to medium coats to achieve hide.
Step 3 - Allow B&C Coat Adhesion Primer to dry 60 min. at 75F or 15 min. at 130F. No sanding or scuffing of primer is required. Apply your basecoat.
Step 4 - Apply clearcoat. (Note: There is no upper limit as to when B&C Coat Adhesion Primer may be topcoated. The "window does not close" as with common adhesion promoters.

The Proof

The paint film on the bumper can be crosshatched with a razor blade, tape tested, and pressure washed with no evidence of basecoat or primer peeling.
As you can see, the pressure washer will drill a hole before the paint peels. This photo shows the clear coat delaminating from the base coat, but neither the basecoat nor the primer is peeling.

Test Properties:

Application viscosity (centipoise)	600 cps
Flash Point	> 40°F (4.4°C)
Film Build Per Coat	0.3 - 0.5 mils (8 - 12µ
Density	7.3 lb/U.S. gal (875 g/L)

See MSDS and product label for additional safety information.

VOCs:

VOCs (ready to spray) 6.3 lb/U.S. gal (755 g/L)

Bumper & Cladding Coat Adhesion Primer is classified as a specialty coating (elastomeric meterial) and is compliant under both EPA National VOC Emission Standards and California's SCAQMD Rule 1151.

People who bought Bumper & Cladding Adhesion Primer Also Bought...