|
New Products | Shopping Cart | Store Directory | |
|
1-800-633-3047 |
International Distributors | Contact Us | Testimonials | About Us | |
MENU
| Catalog & Store |
| How-To... |
| Step-by-Step |
|
| Documents |
| Newsletters |
| ATV's & Motorcycles |
| Bumper Recyclers |
|
| Videos |
| Training |
| Everything Else |
|
|
Microtex Catalyzed Waterborne Texture Material
Microtex is a catalyzed water-based VOC compliant texture material designed to simulate the texture commonly found on OEM automotive bumpers, cladding and trim. Unlike most texture materials, Microtex is a mechanically formed texture so the same textured look is easy to reproduce time and time again. Microtex can be sprayed on most plastics with minimal preparation and will fi ll sanding scratches up to 180 grit. Because Microtex is a catalyzed waterborne paint, it can be topcoated with any paint and can even be wet sanded if desired.
Benefits
- Advanced formulation provides consistent and repeatable textured effect
- Complies with all current VOC rules, including California’s Rule 1151 effective in 2010
- Catalyzed for maximum versatility and durability
- Compatible with any top coat system
- Open window for spraying topcoat
- Long shelf life
Application
- Clean part to be textured with 1000 Super Clean Plastic Cleaner according to the directions on the can
- If surface is painted, sand with 180 grit sand paper. If surface is unpainted plastic, spray a light coat of 1050 Plastic Magic on the sanded substrate according to the directions on the can.
- Stir Microtex thoroughly, DO NOT SHAKE!
- Stir 2% by weight of 3103 catalyst into the desired amount of Microtex.
- At room temperature with 1.3mm HVLP gun, apply 2 to 3 light coats as needed to achieve the desired texture allowing the paint to fl ash between coats.
- Let dry completely for a minimum of one to two hours hour at 75°F (21°C) with 50% humidity or 15 to 30 minutes at 130°F (54°C). More time may be required based on humidity and coating thickness. In extremely humid areas, baking at 130°F (54°C) may be required.
- Topcoat with Bumper and Cladding Coat Paint or any topcoat system after the Microtex is completely dried.
- Clean gun with water followed by acetone.
 |
Microtex Catalyzed Waterborne Texture Material Part No. 3801-1 gallon (3.78 liters) $119.95
|
Product Specifications
| Size | Part Number | Shipping Weight | Dimensions |
|---|---|---|---|
| Quart Kit | 3801-4 | 2.7 lbs. | 4.25” dia x 5” h |
| Gallon Kit | 3801-1 | 10.4 lbs. | 6.75” dia x 7.5” h |
Technical Information:
Compatible Substrates:
Painted or properly prepared unpainted plastics NOT compatible with polyethylenes
VOC Information:
VOC 1.83 lb/gal (219 g/L)
VOC (w/ 3103 catalyst) 1.83 lb/gal (219 g/L)
Properties:
Application Viscosity 760 cps @ 80°F
Flash Point: 224°F (106.7°C)
Density 9.42 lb/gal (1,129 g/L)
Crosslink Time 6 hours at 75°F
Do Not Freeze:
3801 is a water-based product and therefore should not be frozen. Store above 45°F. Freezing will ruin the product.
See MSDS for additional information
1000-A
Super Clean Plastic Cleaner
$7.80
1050-A
Plastic Magic Adhesion Promotor
$15.95
